How to Deposit and Trade Crypto on Coinmetro

How to Deposit on Coinmetro

Deposit Crypto Into Coinmetro

Step 1: Visit the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Step 2: Please choose the crypto you would like to deposit. Roll down on the vertical bar to find your best option.

For example, if you choose BTC – Bitcoin, this window will pop up. 

Step 3:  You can deposit from another broker to Coinmetro by copying this [Wallet Address] by clicking on the two rectangles icon on the right side of the line, then paste it into the withdrawal address field on the external platform or wallet. Or you can scan the [QR code] for this address. To learn more please click on “What is this?”

Ethereum and ERC-20 Tokens

Important: Please make sure to thoroughly read the pop-up notification (shown below) before making a deposit utilizing the ERC-20 method if you are depositing Ethereum or an ERC-20 token.

To deposit Ethereum and ERC-20 tokens, Coinmetro uses smart contracts, therefore this results in a somewhat higher gas cost than usual. Setting the transaction gas limit to 35,000 (55,000 for QNT/ETH/XCM) will guarantee the success of your transaction. It doesn’t cost much more. The transaction will be automatically refused by the Ethereum network if your gas limit is too low. An asset loss resulting from a too-low gas restriction is not a concern.

Deposit Fiat via Bank Transfer Into Coinmetro

To deposit your Euro (SEPA bank Transfer) into Coinmetro, follow these steps.

Step 1: Go to the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Step 2: Click the down arrow to select the currency you want to deposit.

Step 3: Choose EUR - Euro (SEPA Bank Transfer) by clicking on the button as shown.

Step 4: Please fill in your IBANs name into the bar that’s shown on the figure, then click on the "Continue" button.

Important: Only send funds from a bank account in the same name as your Coinmetro account. Payment from third parties will be returned at your expense. Use with a bank account located in the SEPA zone only.

Step 5: Continue to Link Your IBANs information by filling in your Linked IBANs and clicking on the (+) Sign. Paying your bank app to this account by copying the address and clicking the rectangle on the right of each line, then paste it to your bank account.

Please be aware the transaction fee for the SEPA bank transfer would be 1 EUR.

Deposit Fiat via Credit Card Into Coinmetro

Step 1: Go to the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Step 2: Click the down arrow to select the currency you want to deposit.

Step 3: For example: If you would like to use a credit card to deposit, please be aware that is 4.99% fee will be included in your amount.

Step 4: Please choose how much you would like to deposit and place it in the Amount section. Click "Next" to continue.

Important note: Only send funds from a bank account in the same name as your Coinmetro account. Payments from third parties will be returned at your expense. The credit card deposit limit is $5000.

We currently only accept Visa and Mastercard. 

Step 5: Please click on the Open Credit Card Popup tab to continue.

Step 6: Please fill in the information on your card into this window, such as Card Number, Card Holder Name, Expiry Date, and the CVV on the back of the card. Click "Pay Now" to submit and continue. If you would like to cancel, please click on the cancel tab in the bottom right corner of the page.

Deposit Euro via SWIFT into Coinmetro

To deposit your Euro (SWIFT) into Coinmetro, follow these steps.

Step 1: Go to the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Step 2: Click the down arrow to select the currency you want to deposit.

Step 3: Choose EUR - Euro (SWIFT) by clicking on the button as shown.

Step 4: Continue to link your SWIFs by copying the "Bank Name", "Beneficiary Account Number", "Bank SWIFT", "Bank Country", "Bank Address", "Your COMPULSORY Reference", "Beneficiary Name", and "Beneficiary Address" icons by the right of each line, and paste them to your current bank account.

Please be aware the transaction fee for the SWIFT deposit would be 5 EUR.

Important: Only send funds from a bank account in the same name as your Coinmetro account. Payment from third parties will be returned at your expense. It is COMPULSORY to put your reference.

Deposit GBP (Great British Pounds) via Bank Transfer

Step 1: Visit the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Step 2: Next, pick "GBP - Pound Sterling (UK Faster Payments)" from the drop-down selection.

Step 3: Add your sort code and the account number you will be transferring your money from so that our finance staff can quickly link your deposit to your account.

Following the entry of your bank information, click Continue to view Coinmetros banking information. You must transfer money from your online banking or banking app to these addresses, making sure to provide your name in the reference/description area.

Deposit USD via Bank Transfer into Coinmetro

Step 1: Visit the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

Then look for USD in the dropdown menu. To add USD to your Coinmetro account, you have a few different alternatives to choose from:

1. USD - US Dollar (ACH)
2. USD - US Dollar (Domestic Wire),
3. USD - US Dollar (International Wire).

You must carefully read the Prime Trust Account Terms the first time you attempt to deposit US dollars and certify that you have done so. Before making your deposit, you should carefully read them.

Please be aware that owing to extra checks from our US banking partner, the verification for your first USD deposit may take up to 5 working days to be authorized. Once this is finished, an email will be sent to you.

For Prime Trust to verify your residency, you will also need to submit your Social Security Number.

In the unfortunate event that verification fails, we are unable to manually validate your account, thus you will need to choose another deposit method.

Step 2: Select your withdrawal method.

• For USD ACH Bank Transfer

The USD - US Dollar (ACH) option is available in the dropdown menu.

• For USD Domestic Wire

The USD - US Dollar (Domestic Wire) option is available in the dropdown menu.


Step 2: You will see a Compulsory Reference in addition to Coinmetros bank information on the USD Domestic Wire Deposit form.

Then, using your full name and the mandatory reference you supplied in the reference/description section while initiating the transfer, you must pay us the money from your bank account. Your reference must be entered for our banking partner and the finance staff to quickly transfer the monies to your account.

Use the bank information supplied for Coinmetro as shown on the USD Domestic Wire deposit form, and verify each time you transfer money. Details may occasionally change as we add additional banking partners.

Deposit KDA into Coinmetro

Step 1: Visit the Coinmetro homepage, click on the profile icon in the upper right corner and choose the [Deposit] button.

All new users will now have a K: address on their Coinmetro account as a result of the announcement that we support K: addresses. The KDA account address without the ’k’: is still valid for previous users.


Step 2: Choosing "KDA - Kadena (Kadena Network)"

Step 3: You must copy your KDA account number (address) or the TXBUILDER details if you are making a deposit from a Chainweaver wallet into the withdrawal form on the external wallet.

Enter your account number in the withdrawal form for the external wallet and then confirm the transaction

TXBUILDER

The Chainweaver wallet program is where the TXBuilder is primarily intended to be utilized

You will see that you have the choice to copy your account number (KDA deposit address) or TXBUILDER (for Chainweaver wallets) on the Coinmetro deposit form:

You must update your key on each chain if you presently have accounts on several chains and want to use the k: protocol. You may replace your current key fully or just add k: in front of it.

Important note: To make a KDA deposit, you must include the account name. The deposit is assigned to your Coinmetro account according to the account name. The Chainweaver wallet software is the main application for which the TXBuilder is intended. The deposit will not be promptly credited and there will be a delay if you transfer money simply to the key from the TXBuilder. This is because your Coinmetro account is not the only one using the key.

Frequently Asked Questions (FAQ)

Where is my EUR Deposit?

If you have deposited EUR and this has not arrived yet or is pending in your Coinmetro account, it is important to ensure the following:

For All EUR Deposits

• Please check your emails. As Coinmetro is a licensed and regulated exchange, sometimes our team will reach out to you for additional verification checks before processing your deposit.

• Please ensure you have sufficient funds available in your bank account. If you have insufficient funds, your deposit will have been rejected.

• Please ensure that all banking information was entered correctly on the deposit form and the correct details were provided to your bank. If any details were entered incorrectly, please contact support.

• Please ensure that the transaction was successful with your bank. Your funds may not have arrived because your bank may have rejected the transaction without your knowledge.

• Please ensure the name on your Coinmetro account matches the name on your bank account. Coinmetro does not allow deposits from third parties and this will be returned to you at your expense.

• Ensure that your account is fully verified. You can check the status of your verification by clicking the button below.

For EUR SEPA Deposits

• Unless depositing via Instant SEPA, we kindly ask that you allow two full business days for your deposit to arrive before contacting support. Banking cut-off times, weekends, and holidays can affect how long it takes for funds to reach us from your bank.
• Ensure that your IBAN has been added to the EUR SEPA deposit form. This will allow our finance team to assign your deposit without delays. If you have forgotten to add your IBAN, please do this now and let our Support team know as soon as you have done so.

For Credit/Debit Card Deposits

• If you have deposited via credit card, please ensure that:
  • the name on your card matches the name on your Coinmetro account
  • the card is valid for e-commerce, cryptocurrency, or foreign transactions
  • the card is enrolled for 3D Secure transactions
  • you have sufficient funds and have not exceeded any limits
  • you have entered the correct 3D Secure password
  • you have entered the correct CVC code or expiry date
  • the card is not expired
  • the card is not a prepaid card
  • a repeated amount of small transactions have not been sent
  • the deposit amount is no more than 5,000 EUR.

If you have ensured all of the above and your EUR deposit is still missing, please contact our 24/7 live client support team so this can be investigated further.

What are the Deposit limits for Fiat?

GBP Faster Payments, USD Local Wire, International Wire, SWIFT, and SEPA deposits

There are no daily deposit limits; however, there is a €500,000 or equivalent limit per month for Level 1 Verification. For users verified to Level 2, this limit does not apply.

Credit Card transfers

Our required minimum deposit amount is €10 or equivalent, and the maximum deposit limit is €5,000 per transaction.

USD Local ACH deposits

The current limit is $2500 per transaction and $5000 per month.

What verification do I need to Deposit USD?

Should you reside in the United States, and you are looking to make a deposit in USD with either the ACH deposit method or Wire transfer (domestic wire), please note that the first time you go to deposit or withdraw US dollars from your Coinmetro account, there is a little further verification that is required from our banking partner.

Firstly, ensure that you have completed your Coinmetro Profile Verification. A verified account is required to deposit both fiat and crypto into your Coinmetro account. For fiat deposits, you will also need to save your address in the system.

Register Coinmetro AccountOpen demo account

How to Trade Crypto on Coinmetro

Getting Started with the CoinMetro Exchange Platform

The CoinMetro Exchange Platform offers more precision and more control over trading than the Dashboard Swap Widget. 

If you would like to start trading with more precision than just buying and selling, or if you’d just like a quick breakdown of CoinMetro’s Exchange platform, you’ve come to the right place!

The CoinMetro Exchange Platform can be accessed by selecting the Exchange tab from either your CoinMetro Dashboard or the Markets page.

How to find your active limit order on the CoinMetro Exchange Platform.

On Desktop

Click on the ’Exchange’ tab at the top of the screen.

On the Coinmetro Mobile App

Click on ’More’ in the bottom right-hand corner, then ’Exchange’ from the side menu.

Why use the Exchange Platform?

When using the Dashboard Swap Widget, you can very easily buy or sell cryptocurrency at a fixed price, making it perfect for quick trades at the best available price. The Exchange Platform instead offers much more precise trading, placing orders at various price points to be traded in the future, and more:

•      Buy or sell at the best available price, just like Dashboard Swap Widget (Market Order),
•      View price charts with built-in trading indicators,
•     View order books for all orders for trading pairs, showing at what prices other traders are looking to buy or sell,
•     Place Limit Orders, allowing you to place an order to be filled at a specific price,
•     Place Stop Orders to limit losses in case the market moves against you,
•     See an easy overview of your pending and previous orders.

Please note that to enable stop orders and finer order control such as allowing partial fills, this must be enabled from the settings menu, available via the cogwheel.

Price Warnings

Following our recent platform update, our effort to improve your trading experience is continuing with the introduction of a new Price Warning feature. The Slippage Warning Dialog is there to show you in real time if any of your orders could lose more than 3% due to slippage. This is an important component of your trading arsenal, as it will warn you immediately before confirming orders. Use this to your advantage, so you can be aware, act fast and stay on top of the markets.

The Price Warning Dialog shows up if the user submits an order which could lose more than 3% due to slippage. The mechanism works like this:

• No warning is shown when slippage is under 3.00%
• It shows a green warning from 3.00% to 4.99%
• It shows an orange warning from 5.00% to 9.99%
• It shows a red warning from 10.00%+
• The calculation takes the size of the order into account and adjusts the slippage warning percentage accordingly
• It will appear when placing a new market/limit order or editing an open order
• It will appear on both the Exchange and Margin platforms.

What does it not do:

• Take spread into account (for now)
• It will not appear when doubling or closing a % of Active Positions on Margin (for now).

Exchange Platform Order Types

When placing an order on the Coinmetro Exchange Platform, you may have noticed that you will have the option to place market orders, limit orders, and for advanced traders, stop orders.

Market Orders

Market orders are the most basic buy and sell trades, where a user places a trade order which then will be filled at the price this is currently going for in the book. When placing a market order, you are opting for whatever price the asset is currently going for, so the trade will be filled rather quickly. For example, if placing a market sell order, this means that the asset will sell for whatever a buyer is bidding for in the books. Please be mindful that the price displayed before executing the order may not be the price that your asset sells for.

Coinmetro offers the option to apply for price protection on your market order when checking the ’max/min’ slider. This will ensure that your market order is not filled below or above the specified price. If you would like more fine-grained control of your market order you can use this setting. Please note, the possibility to use this feature is dependent on liquidity.

How to Buy Crypto on Coinmetro

After signing in to Coinmetro:

1. Visit the Coinmetro homepage, Click on the Exchange tab to purchase or sell crypto.

2. Then choose the crypto to exchange. Here, we use BTC/EUR as an example.

3. To search and look for the crypto you would need to exchange by simply typing in the crypto acronym in the [Search all asset pairs] area.

Market Trading

After choosing the crypto type you can purchase the crypto by clicking on Buying.

For buying at the current Market Price: 
(1)    Click on the Market tab. 
(2)    Type how much to buy in the BTC area 
(3)    Or type in how much EUR (currency) area 
(4)    Click on Buy BTC @ Market to submit the decision.

Limit Trading

For Limit Buying, follow these steps: 
(1)   Click on the Market tab.
(2)   In the BTC area type how much crypto you would like to buy, 
(3)   Or type in how much in EUR (currency) area to buy.
(4)   Click on Limit Buy to submit the decision.

How to Sell Crypto on Coinmetro

After signing in to Coinmetro:

1. Visit the Coinmetro homepage, Click on the Exchange tab to purchase or sell crypto.

2. Then choose the crypto to exchange. Here, we use BTC/EUR as an example.

3. To search and look for the crypto you would need to exchange by simply typing in the crypto acronym in the [Search all asset pairs] area.

Market Trading

For Selling at the current Market Price:
(1)    click on the Market tab. 
(2)    Type how much to sell in the BTC area 
(3)    Or type in how much EUR (currency) area 
(4)    click on Sell BTC @ Market to submit the decision

Limit Trading

For Limit Selling, follow these steps: 
(1)   Click on the Market tab.
(2)   In the BTC area type how much crypto you would like to Sell, 
(3)   Or type in how much in EUR (currency) are to Sell.
(4)   Click on Limit Sell to submit the decision.

How to Set a Stop Loss or Take Profit

What is a Stop Order?

Stop orders are used to enter a position when the price breaks above or below a certain level (the Stop price). Stop orders are available on the Exchange Platform (with Advanced features enabled) and the Margin Platform.

For example, if the price for QNT  is currently 104 and you want to buy as soon as the price gets to 105, you can place a Stop Buy order with a stop price of 105.

Similarly, if you placed a Stop Sell order with a stop price of 100, you would sell once the price drops to 100. These are typically used to enter "breakout" trades when the price breaks through a key support or resistance level.

What is Take Profit?

Take Profit (TP) can be set up by simply using a Limit Order at the price you wish to sell your asset to gain a profit.

For example, if I bought QNT at 100 EUR and would like to sell it once the price reaches 110 EUR, I would set a Limit Order to sell my QNT at the 1110 EUR mark. This offers an offhand approach to setting a Stop Loss because it is always good to have a figure in mind on when you would like to exit if the price starts dropping. The order will be visible in the order books from the start and other traders will see that you are buying QNT at the 110 EUR mark.

The Take Profit option is currently available on the Coinmetro Margin Platform; however, this is not yet available on the new Margin Beta but more advanced features are due to be added shortly! In the meantime, if you wish to set up a Take Profit (TP), you can do so by editing your order or position, or by using the Classic Margin Platform. 

Summary

Stop Loss (SL) - Set at a price at which the order automatically closes, when the price of the investment reaches a specified lower price.

Take Profit (TP) - Set at a price at which the order automatically closes, when the price of the investment reaches a specified upper price.

In Margin Trading a new limit or stop order will always open a new position, even if you have an existing open position for the same pair. It’s possible to be both long and short in the same pair at the same time in margin trading. 

In margin trading the take profit and stop loss are specified in the opening order or subsequently added to the open position.

How to Place a Stop Order

A Stop Order (also referred to as a stop-loss), is an order placed to buy or sell an asset once the price of the asset reaches a specified price (known as the stop price). When the stop price is reached, a stop order becomes a market order. A buy-stop order is entered at a stop price above the current market price. 

Stop orders can be placed both on the Coinmetro Exchange Platform and the Margin Platform.

In short, a stop order will trigger an order when an asset reaches a specific price. On the Coinmetro Exchange platform, you can use a stop order to sell an asset if it drops below a certain price, or buy an asset if it moves above a certain price.

When are Stop Orders useful?

An example of when a stop order could be useful is when chart analysis suggests a strong support level at a certain price. By placing a sell order at a price point below the support level, you can protect yourself against further loss, in case the support would break.

How to Enable Stop Orders

To enable the stop order option in the Exchange platform, advanced features must be enabled in the Settings menu, accessible via the cogwheel in the upper right section of your screen.

The Order Form for Stop Orders

To explain the order form for a stop order, the first field to look at is the Stop Price. In the example below, the stop price has been set to 1 EUR for XCM. This means that once XCM reaches the price of 1EUR, either a market or limit order will be triggered.

How to Execute a Market Stop Order

The first way you can utilize a stop order is to execute a market order when your stop price is reached. To do this, all you need to do is input the Stop Price, enable Immediate Order and place your order.

With the Partial Fill box checked, your order will be executed as Immediate-or-Cancel. If any portion of your order isn’t filled, it will be canceled.

With the Partial Fill box unchecked, your order will be executed as a Fill-or-Kill market order. If your whole order can’t be filled, it will be canceled.

Please note that market orders will generally be filled entirely at a fair market price on most of our available pairs. However, we advise you to always combine your Stop Price with a Max/Min (depending on if you are buying or selling) price, to protect you in case there are no orders available near your stop price, which otherwise might cause your market order to be executed at a loss.

How to Execute a Limit Stop Order

By setting a Max Price (when buying) or Min Price (when selling) together with your stop price, your stop order will execute a limit order once your stop price is reached.

Without Immediate Order selected, it will place a limit order into the book at the specified price, which will remain until filled or canceled.

With a limit price set, the Immediate Order option should not be ticked. If this option is selected, it will execute as a market order up to your limited price. The Stop Price is at what price point your order will be executed.

Frequently Asked Questions (FAQ)

Where can I see my active orders?

You can easily view your active orders on the Exchange Platform with just the click of a button!

On Desktop

Firstly, from your Dashboard, head to the Exchange Platform by clicking the ’Exchange’ tab at the top of the page.

Then, scroll down and click on the ’Active Orders’ tab to view your active limit orders.

On the Coinmetro Mobile app

From your Dashboard, you can enter the Exchange Platform by either tapping on the ’Buy/Sell icon below your account balance, or tapping on the ’More’ icon in the bottom right-hand corner, then clicking on ’Exchange’.

Then, scroll down and click on the ’Active Orders’ tab to view your active limit orders.

How to Edit an Active Limit Order?

Limit Orders can be canceled easily in just a few clicks!

Firstly, you will need to head to the Coinmetro Exchange Platform.

Then, at the bottom of the page underneath the price chart, you will see the Active Orders tab. Here you can see all of your current active limit orders.

Then, find the order you wish to edit and select the pencil icon as highlighted in the image below.

Here, you will be able to view your order and make any necessary adjustments including editing the limit price, and the order size, and you can even add a comment (optional)!

Now, all you need to do is select Confirm Adjustment and the changes will be applied to your order. Congratulations, you have successfully edited your limit order!

How to Cancel an Active Limit Order?

Active Limit Orders on the Coinmetro Exchange Platform can easily be canceled in just a few clicks!

Firstly, you will need to head to the Coinmetro Exchange Platform.

At the bottom of the page underneath the price chart, you will see the Active Orders tab. Here you can see all of your current active limit orders.

Then, find the order you wish to cancel and select the red cross button as highlighted in the image below.

Finally, confirm the cancellation of your order in the cancel dialogue box.

Please note that if your order has already been partially filled, only the remainder of the order will be canceled. It is not possible to reverse any filled portions of active orders.

Where can I see my Order History?

To check your order simply on the Order History 

On Desktop

1. From the Dashboard, by clicking on the Exchange tab on the top column to purchase or sell crypto.

2. Then, scroll down and click on the Order History tab to view your full market and limit order history. You can also see your canceled orders by selecting the Show Cancelled toggle.

On the Coinmetro Mobile app

From your Dashboard, you can enter the Exchange Platform by either tapping on the ’Buy/Sell icon below your account balance, or tapping on the ’More’ icon in the bottom right-hand corner, then clicking on ’Exchange’.

Then, scroll down and click on the ’Order History’ tab to view your full market and limit order history. 

What is an Order Book?

An order book on the Exchange Platform is simply a list of buy and sell orders placed by market makers for a specific trading pair such as BTC/EUR or ETH/USD.

Below is an example of the BTC/EUR order book.

As we can see in the image above, the order book is split into two sections:

1. Bids (buyers) in green

2. Asks (sellers) in red.

In the middle of these highlighted in yellow, we can see the “mid-price”. This is simply just the price in the middle of the lowest ask and highest bid.

Anyone can be a “market maker” by simply placing a Limit Order. Whilst your limit order is active, this will appear in the order book underlined. In the example below, we have placed a bid (buy) for BTC at 60,115.00 EUR.

As you can see, your active order will appear on the green side as it is bid, and you are saying you want to buy BTC for this specified price. Essentially, your order is placed in a queue until it is filled by another trader, or if you decide to cancel it.

Spread

When we are referring to the spread of an order book, this can easily be described as the difference in price between the lowest ask and highest bid. The spread can be displayed as an absolute value which is €0.02, or as a % value which is 0.003% as shown in the example below.

Whilst it is common to see either one of the other, Coinmetro displays both for transparency.

Cumulative Orders

Coinmetro allows users to control how they visualize the order book in multiple ways.

Firstly, you can view all the orders in the book cumulatively. This means that instead of seeing multiple levels and the amount at each price level independently, you can see the sum as you look up the book. This can be achieved by selecting the symbol as shown below.

This feature is extremely useful in case you are placing a market order and the order book is fairly thin/illiquid. You will be able to see exactly how your buy or sell order will impact the price of the asset you are trading, which can help you determine if you wish to wait/place a smaller or larger order, or use another order type such as a limit order.

Cumulative Volume

Cumulative volume essentially works the same as the cumulative order book; but instead of showing the values cumulatively, it only shows the volume bars (the red and green bars in the book). This can be achieved by selecting the symbol shown below.

This feature can be very useful at a glance to see where there are larger orders or ’holes’ in the order book.

Maker Fees vs Taker Fees

When placing an order on the Coinmetro Exchange Platform, you would either incur a taker or maker fee. So, what is the difference between the two?

Taker Orders

Clients who place an order that is filled immediately, such as a market order will be charged a taker fee. These orders take liquidity from the order book, and as such are called takers. Takers on the Coinmetro Exchange will pay a commission of 0.10%.

Maker Orders

A maker order is a limit order which rests in the order book for any period. This terminology comes from the fact that placing limited orders on the books helps to “make the market,” which makes you a “market maker”.

Makers pay no commission on the Exchange Platform, and the maker fee is 0%. For Margin trades, you will be charged a 0.1% fee for the initial and subsequent trade (in and out of the trade), equalling 0.2% total.

Earn XCM from Trading

Staking your XCM at Coinmetro enables traders to earn XCM rebates from their trading fees, among other benefits. Up to 25% of taker fees can be paid back in XCM, and makers can earn up to 50% of the taker’s net fees.

The XCM Token Utility

100% of all the trading fees will be used to purchase XCM directly from the market, and up to 50% will be time vaulted and taken out of the supply. As the trading volume increases, so will automated market buying.